Raritan’s sensors are deployed as plug-and-play options for PX intelligent rack PDUs, EMX rack controllers, PX inline meters and branch circuit monitors eliminating the need for a separate controller. Environment data is instantly sent to a DCIM software solution. A simple web-based interface allows data center managers to see real-time environment data and report trends over time. Raritan environment sensors enable data center managers to:
Learn more about other advanced rack monitoring solutions for maintaining uptime.
(DX2-T1) Single temperature sensor, field replaceable sensor module, RJ-45 connector.
(DX2-T1H1) Single combo temperature and humidity sensor, field replaceable sensor modules, RJ-45 connector.
(DX2-T2H2) Dual combo temperature and humidity sensors, field replaceable sensor modules, RJ-45 connector.
(DX2-T3H1) Three temperature sensors, middle sensor supporting humidity (four sensors total in three housings), field replaceable sensor modules, RJ-45 connector.
(DX2-AF1) Numeric sensor with RJ-45 connector, designed to monitor presence of cooling air.
(DX2-T1DP1) Differential air pressure sensor with RJ-45 connector, designed to monitor two air pressures such as the air pressure on either side of a thermal curtain separating a cold aisle from a hot aisle or above and below a raised floor or overhead plenum.
(DX2-WSF-KIT) Floor water/leak sensor and a contact closure sensor for detecting water or water and glycol leaks. Reliably warns of water leaks at critical points below a raised floor. Available in 35/70/100 mm.
(DX2-WSC-KIT) Rope water/leak sensor and a contact closure sensor for detecting water or water and glycol leaks. Detect leaks anywhere along the length of this flexible cable and report the position on the cable. Wrap around a rack with in-row cooling. Available in 35/70/100 mm.
(DX-PD2C5) Two active dry contacts powered by 12V to support door locks. Normally Closed (NC) or Normally Open (NO) contact closures which require customer-provided NC or NO switches, e.g. door open/close, smoke present/absent, etc. RJ-45 connector (Not supported by DPX, PX or PX2 models).
(DX2-CC2) 2 Contact Closure Sensor for connection and management 3rd party sensors (Smoke, Sound, etc.)
(DX-PIR) Digital proximity sensor which detects motion around a cabinet, RJ-45 connector (Not supported by DPX, PX or PX2 models).
(DX-VBR) Vibration sensor which detects acceleration along three axes (x, y, z). RJ-45 connector.
(DX2-ENVHUB4) Four-port (1x4) hub to expand RJ-45 sensor ports, comes with mounting bracket.
(DX2-REMHUB4) Four-port (1x4) hub to expand the length of RJ-45 sensor ports, comes with mounting bracket. Can only be used with (SRC-0800).